Uncategorized Infrared Belt Temperature Gauge/Sensor for Lowrance Off Road GPS August 14, 2019 steven Now Available at: https://ruggedroutes.com/UTV-belt-temperature-gauge-sensor-lowrance-off-road-gps.html Infrared UTV Belt Temp Sensor for Lowrance GPS Units This infrared belt temp sensor is an easy install accessory for Lowrance HDS and Elite Ti GPS Units. It simply connects to the N2K network just like a Point-1 Baja Antenna, and displays your CVT Belt Temp right on the Lowrance GPS screen. Keep an eye on your belt temp in order to adjust your driving style or as an aid in clutch tuning for prolonging the life of your CVT Belt. Simply drill a 3/8″ – 1/2″ hole in the plastic belt cover above the center of your belt, and stick the sensor on. The sensor is a small cube & contours to the belt cover with a 3/16″ thick waterproof closed cell foam & easily sticks on with a high strength waterproof adhesive by 3M. Install on a clean plastic surface, hold down for 30 seconds and wait 24 hours to fully adhere. *Compatible with Gen2 or Newer HDS Units, and Elite Ti 7″ Or Larger. Not Compatible with Elite-5 Ti. *Sensor Only, NMEA 2000 Connectors or extension cables not included. For NMEA 2000 components, please visit: Lowrance Data Cables & Connectors An infrared belt temp sensor for UTVs that allows the belt temp gauge to be displayed on the screen of a Lowrance HDS or Elite Ti GPS unit. The above video shows, what the sensor looks like, how it attaches to the GPS and how to configure the GPS to display the temperature.